add pulseaudio to connect to spotify

Signed-off-by: Jessica Frazelle <princess@docker.com>

pulseaudio/Dockerfile

@@ -5,6 +5,8 @@
 #	--device /dev/snd \
 #	--name pulseaudio \
 #	-p 4713:4713 \
+#	-v /var/run/dbus:/var/run/dbus \
+#	-v /etc/machine-id:/etc/machine-id \
 #	jess/pulseaudio
 #
 FROM debian:sid
@@ -28,6 +30,8 @@ WORKDIR $HOME
 USER pulseaudio
 
 COPY default.pa /etc/pulse/default.pa
+COPY client.conf /etc/pulse/client.conf
+COPY daemon.conf /etc/pulse/daemon.conf
 
 ENTRYPOINT [ "pulseaudio" ]
 CMD [ "--log-level=4", "--log-target=stderr", "-v" ]

pulseaudio/client.conf

@@ -0,0 +1,37 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA.
+
+## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
+## more information. Default values are commented out.  Use either ; or # for
+## commenting.
+
+; default-sink =
+; default-source =
+; default-server =
+; default-dbus-server =
+
+autospawn = no
+daemon-binary = /bin/true 
+; extra-arguments = --log-target=syslog
+
+; cookie-file =
+
+; enable-shm = yes
+; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+
+; auto-connect-localhost = no
+; auto-connect-display = no

pulseaudio/daemon.conf

@@ -0,0 +1,86 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
+## more information. Default values are commented out.  Use either ; or # for
+## commenting.
+
+; daemonize = no
+; fail = yes
+; allow-module-loading = yes
+; allow-exit = yes
+; use-pid-file = yes
+; system-instance = no
+; local-server-type = user
+; enable-shm = yes
+; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+; lock-memory = no
+; cpu-limit = no
+
+; high-priority = yes
+; nice-level = -11
+
+; realtime-scheduling = yes
+; realtime-priority = 5
+
+exit-idle-time = 180
+; scache-idle-time = 20
+
+; dl-search-path = (depends on architecture)
+
+; load-default-script-file = yes
+; default-script-file = /etc/pulse/default.pa
+
+; log-target = auto
+; log-level = notice
+; log-meta = no
+; log-time = no
+; log-backtrace = 0
+
+; resample-method = speex-float-1
+; enable-remixing = yes
+; enable-lfe-remixing = no
+
+flat-volumes = yes
+
+; rlimit-fsize = -1
+; rlimit-data = -1
+; rlimit-stack = -1
+; rlimit-core = -1
+; rlimit-as = -1
+; rlimit-rss = -1
+; rlimit-nproc = -1
+; rlimit-nofile = 256
+; rlimit-memlock = -1
+; rlimit-locks = -1
+; rlimit-sigpending = -1
+; rlimit-msgqueue = -1
+; rlimit-nice = 31
+; rlimit-rtprio = 9
+; rlimit-rttime = 200000
+
+; default-sample-format = s16le
+; default-sample-rate = 44100
+; alternate-sample-rate = 48000
+; default-sample-channels = 2
+; default-channel-map = front-left,front-right
+
+; default-fragments = 4
+; default-fragment-size-msec = 25
+
+; enable-deferred-volume = yes
+; deferred-volume-safety-margin-usec = 8000
+; deferred-volume-extra-delay-usec = 0
+

pulseaudio/default.pa

@@ -1,164 +1,26 @@
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-# This startup script is used only if PulseAudio is started per-user
-# (i.e. not in system mode)
-
-.nofail
-
-### Load something into the sample cache
-#load-sample-lazy x11-bell /usr/share/sounds/freedesktop/stereo/bell.oga
-#load-sample-lazy pulse-hotplug /usr/share/sounds/freedesktop/stereo/device-added.oga
-#load-sample-lazy pulse-coldplug /usr/share/sounds/freedesktop/stereo/device-added.oga
-#load-sample-lazy pulse-access /usr/share/sounds/freedesktop/stereo/message.oga
+# Replace the *entire* content of this file with these few lines and
+# read the comments
 
 .fail
+    # Set tsched=0 here if you experience glitchy playback. This will
+    # revert back to interrupt-based scheduling and should fix it.
+    #
+    # Replace the device= part if you want pulse to use a specific device
+    # such as "dmix" and "dsnoop" so it doesn't lock an hw: device.
+    
+    # INPUT/RECORD
+    load-module module-alsa-source device="default" tsched=1
+    
+    # OUTPUT/PLAYBACK
+    load-module module-alsa-sink device="default" tsched=1 
+    
+    # Accept clients -- very important
+    load-module module-native-protocol-unix
+    load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1;192.168.0.0/24 auth-anonymous=1
 
-### Automatically restore the volume of streams and devices
-load-module module-device-restore
-load-module module-stream-restore
-load-module module-card-restore
-
-### Automatically augment property information from .desktop files
-### stored in /usr/share/application
-load-module module-augment-properties
-
-### Should be after module-*-restore but before module-*-detect
-load-module module-switch-on-port-available
-
-### Load audio drivers statically
-### (it's probably better to not load these drivers manually, but instead
-### use module-udev-detect -- see below -- for doing this automatically)
-#load-module module-alsa-sink
-#load-module module-alsa-source device=hw:1,0
-#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
-#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
-#load-module module-null-sink
-#load-module module-pipe-sink
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-udev-detect.so
-load-module module-udev-detect
-.else
-### Use the static hardware detection module (for systems that lack udev support)
-load-module module-detect
-.endif
-
-### Automatically connect sink and source if JACK server is present
-.ifexists module-jackdbus-detect.so
 .nofail
-load-module module-jackdbus-detect channels=2
-.fail
+.ifexists module-x11-publish.so
+    # Publish to X11 so the clients know how to connect to Pulse. Will
+    # clear itself on unload.
+    load-module module-x11-publish
 .endif
-
-### Automatically load driver modules for Bluetooth hardware
-.ifexists module-bluetooth-policy.so
-load-module module-bluetooth-policy
-.endif
-
-.ifexists module-bluetooth-discover.so
-load-module module-bluetooth-discover
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-### Network access (may be configured with paprefs, so leave this commented
-### here if you plan to use paprefs)
-#load-module module-esound-protocol-tcp
-#load-module module-native-protocol-tcp
-#load-module module-zeroconf-publish
-
-### Load the RTP receiver module (also configured via paprefs, see above)
-#load-module module-rtp-recv
-
-### Load the RTP sender module (also configured via paprefs, see above)
-#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
-#load-module module-rtp-send source=rtp.monitor
-
-### Load additional modules from GConf settings. This can be configured with the paprefs tool.
-### Please keep in mind that the modules configured by paprefs might conflict with manually
-### loaded modules.
-.ifexists module-gconf.so
-.nofail
-load-module module-gconf
-.fail
-.endif
-
-### Automatically restore the default sink/source when changed by the user
-### during runtime
-### NOTE: This should be loaded as early as possible so that subsequent modules
-### that look up the default sink/source get the right value
-load-module module-default-device-restore
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Honour intended role device property
-load-module module-intended-roles
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### If autoexit on idle is enabled we want to make sure we only quit
-### when no local session needs us anymore.
-#.ifexists module-console-kit.so
-#load-module module-console-kit
-#.endif
-#.ifexists module-systemd-login.so
-#load-module module-systemd-login
-#.endif
-
-### Enable positioned event sounds
-load-module module-position-event-sounds
-
-### Cork music/video streams when a phone stream is active
-load-module module-role-cork
-
-### Modules to allow autoloading of filters (such as echo cancellation)
-### on demand. module-filter-heuristics tries to determine what filters
-### make sense, and module-filter-apply does the heavy-lifting of
-### loading modules and rerouting streams.
-load-module module-filter-heuristics
-load-module module-filter-apply
-
-# X11 modules should not be started from default.pa so that one daemon
-# can be shared by multiple sessions.
-
-### Load X11 bell module
-#load-module module-x11-bell sample=x11-bell
-
-### Register ourselves in the X11 session manager
-#load-module module-x11-xsmp
-
-### Publish connection data in the X11 root window
-#.ifexists module-x11-publish.so
-#.nofail
-#load-module module-x11-publish
-#.fail
-#.endif
-
-### Make some devices default
-#set-default-sink output
-#set-default-source input

skype/Dockerfile

@@ -2,9 +2,10 @@
 # (but I have a container for that)
 #
 # docker run -v /tmp/.X11-unix:/tmp/.X11-unix \
-#	-v /dev/snd:/dev/snd \
 #	-e DISPLAY=unix$DISPLAY \
-#	--link pulseaudio \
+#	--link pulseaudio:pulseaudio \
+#	-e PULSE_SERVER=pulseaudio \
+#	--device /dev/video0 \
 #	jess/skype
 #
 FROM debian:jessie